Features
• Use simple wire leads type (standard length: 2 meters);
• No interference by external light;
• 5 mm wide slot ,five kinds appearance, applicable to all kinds of installations, mark detection, liquid level detection;
• Low cost, can be customized 5 VDC;
• Length of cable can be customized;
• The design of our products can be waterproof, prevent oil, dustproof or other functions.
Procurement
Amplifier Outside(be with cable)
Amplifiber Inside(in sensing housing)
※available to customize waterproof, low voltage (5V) and other special functions;
※ "/15D" mean the M8 connector type with 150mm cable;
Specifications
Emitting light
|
Red LED:630nm |
Operating voltage
|
DC:10~30VDC±10%(Ripple P-P:10%Max) |
Current consumption
|
15mA Max |
Load currents
|
100mA Max at DC 24V |
Output type
|
N=NPN.NO P=PNP.NPN |
Protection circuit
|
Reversed supply ciruit protection,short citcuit protection output
|
Response time
|
0.3 ms Max |
Insulation resistance
|
20M Ωmin.(DC500V) |
Voltage withstandatility
|
AC1000V 60Hz for 60 Sec |
Operating temperature
|
-10°C~+45°C(No freezing allowed ) |
Ambient hunidity
|
35%~95%RH |
Storage temperarure
|
-10°C~+55°C(No freezing allowed ) |
Storage hunidity
|
35%~95%RH |
Material
|
ABS |
Wiring method
|
φ2.6×2M/4-wires / φ4.2×2M/3-wires / φ4.2×2M/4-wires |
Protection degree
|
IP66 |
Weight
|
Approx.18.5g |
Circuit Diagram
NPN.NO.NC (4-wires)
|
PNP.NO.NC (4-wires)
|
|
|
NPN.NO/NC (3-wires)
|
PNP.NO/NC (3-wires)
|
|
|
Connector(3-pins/4-pins)
|
|
|
|
|