Type |
Red LED |
Green LED |
High-Speed |
NPN OutPut |
FF-12 |
FF-12G |
FF-12H |
PNP OutPut |
FF-12P |
FF-12GP |
FF-12HP |
Supply voltage |
12-24VDC ±10% ripple P-P10%以下 |
Current consumption |
30mA or less |
Detection output |
NPN output type:
NPN open-collector transistor
Maximum sink current: 100mA
Voltage:30VDC or less(when detecting or between 0 to 30 VDC)
Residual voltage: 1.0V or less (current 50mA) ,4 V (current 50mA) |
PNP output type:
PNP open collector transistor
Maximum flow current:100mA
Voltage:30VDC or less(when detecting or between 0 to 30 VDC)
Surplus voltage: 2.0 V or less (current 100 mA),1.0 V (current 16 mA) |
Output operation |
Detecting ON or not detecting ON , t ON/OFF switch choice. |
Short circuit protection |
Polarity protection / Circuit protection |
Indicator |
Power light: green, Output light: red |
Sensitivity function |
1.5 circle turn adjusting |
Loading current |
100mA Max.at DC 24V |
Isolating impedance |
20M Ω min.(DC500V) |
Insulation compression
|
AC500V 60Hz for 60sec |
Protection level |
IP67 |
Reaction time |
reflex:150μs
through-beam:1000μs |
reflex:70μs
through-beam:300μs |
reflex:40μs
through-beam:200μs |
Detection distance |
reflex: 100mm through-beam:1000mm |
Reaction time |
0.5ms or less((Resistance interference function 0.7ms or less)about 250μs |
Timer function |
about 40ms OFF Delay time |
Operating environment temperature |
-10~+50℃ (no-freezing,no-dew) Storage:-20~+70℃ |
Operating environment humidity |
35~85%RH , Storage:-:35~85%RH |
Material |
Shell: heat-resistant ABS, cover: polycarbonate, optical fiber fixed rod: PPS |
Accessories |
(Amplifier mounting bracket):1个 |